If our home is sealed completely, fresh air should only be brought in through a window or door. Ventilation is essential to remove unwanted smells, water vapor, and pollution. However, we must also control the ventilation system so it can be turned on or off when we need it and directed where it is needed. You can click over here to check the best ventilation services.
This will prevent heat from being wasted in the same way water is lost through dripping taps. The heat that is allowed to escape from the air for ventilation purposes will be lost.
Image Source: Google
According to conventional wisdom, a room of average size requires at least one hour of air changes per hour. This can vary depending on the number of people in the room and the nature and number of sources of pollution. Infiltration and air bricks were the traditional methods of ventilation.
Permanent ventilation is required for combustion
Heating appliances that need air to operate safely should be equipped with a permanent ventilator. There is a danger that the fuel may not burn efficiently without adequate oxygen. If toxic products from combustion are not exhausted, they could build up in a room and prove fatal. Old houses often have original ventilators that are covered with paper. It is important to ensure they are not blocked or find an alternate route for the combustion air.
Is it possible to save heat through controlled ventilation? This is what heat exchangers were designed for. These heat exchangers are relatively new and can be used to recover heat from warm air before it is lost to the atmosphere. They are part of a wider strategy for ventilation and energy conservation. It works by heating the incoming air within the tubes and fins.